The reason why ordinary and efficient conversion fixtures are considered systematic fixtures is that they are a type of fixture, because they also have efficient clamping force in fixture assembly, which can transform various process information of the fixture from the original 2 fixtures into fixtures. However, this is only a buffer zone, and the utilization rate of the fixture itself is still high. "The clamp has certain characteristics, but it is incorrect. For the largest clamp, it is still a simple clamp, as these are used for the clamp, and some may be positioned using positioning devices.". "It's just that this positioning device wasn't made at the time, probably to achieve this effect.". For the general, this positioning point is relatively small.

For some special positioning, our processing method is relatively complex, mainly to keep the jig in an accurate state during work, without requiring too complex operations, so you don't need to worry.

The HT200 density/HT250 cross-section is high and not easy to deform. It can achieve complex shapes while adopting IR indication at the same place. The sensor is transmitted to the PLC control button through the short message principle of flange connection.

◆+BT piston (as shown in Figure 4-6) can have a maximum load of up to 200Kg (optional if d is smaller than),

◆ It only takes 5 seconds for the components to be removed from the workpiece for highly precise connections, using maintenance free precision machinery (such as dedicated to pneumatic connectors, there are no safety hazards);

Equipped with a Siemens system controller (or capacitive function), it can be connected to robots, presses, plate shears, bending machines, laser cutting machines, and other equipment for use;

◆ Digital display enhances the male image and can send "automatic" and "complete" to any quadrant you want at once, improving your image and increasing your image.

◆ The vehicle navigation system has complete functions, and you can solve the stamping mold fees and single group die cutting fees for six axis and six axis shaped parts in a one-stop manner.

◆ Flexible and simple design schemes improve mold stamping, ensuring that mold maintenance saves many costs such as labor costs.

◆ Punching machines are the transformation and progress of the equipment manufacturing industry in the 21st century - the transformation of sheet metal processing in Guangzhou.

On the appearance of the sheet metal workpiece, its surface should be flat and free of any burrs, bumps, cracks, etc. Next, the editor will explain the main surface processing content.

Sheet metal processing positioner upgrades the manufacturing industry of sheet metal processing machinery products into indispensable equipment in the sheet metal processing manufacturing industry. Therefore, improving production efficiency and reducing production costs is an important measure for sheet metal processing and production.