Prediction of the development trend of CNC Turning Part Research on deformation prediction of metal material parts and machining and manufacturing process methods.

1. Improving the turning process, advancing the development direction of automobile parts manufacturing, searching for new technologies, putting forward the word "high" for automobile parts manufacturing, and grasping the "six fixed metal discontinuities" to solve this problem.

4. New mechanism research, process development and testing, precision manufacturing technology application of new processes for brush replacement components;

2. The company's annual production testing presses and plastic testing equipment research and development, manufacturing, and sales; Research and development of three major links for integration of automation degree; (Hereinafter referred to as "measuring press") 1. Research and development and sales of intelligent manufacturing systems: research and development and sales of customized sensors for customers: design, manufacture, debugging, and service according to customer requirements: provide customers with satisfactory pre-sale and after-sales services: provide customers with quality guaranteed after-sales services.

Data transmission system: transmission assembly and monitoring detection, pressure sorting, machine parameter alarm, microcomputer fault alarm, machine fault alarm, flow level alarm, temperature monitoring, audible alarm, temperature monitoring, undervoltage phenomenon alarm, overheat alarm, pneumatic pressure gauge alarm, undervoltage phenomenon alarm, temperature shift alarm, temperature abnormality alarm, button search for relevant alarm information. No problems were found with the assembly. The hydraulic pump has already turned, the motor cannot be connected, and the air pressure pump will slip. Therefore, if the pressure is insufficient, the seller should increase the pressure at the corresponding pressure to check the pressure and check whether the oil pipe is bent or deformed, or there is oil leakage. Hydraulic components Liaocheng City.

The difference between hydraulic bending machines and ordinary bending machines is that their models are almost similar. The model of the ordinary bending machine is the digital bending machine, and the digital bending machine can control the hydraulic shear pressure by only using these three models. The model of an ordinary bending machine is digital. As long as the machine is controlled according to three models, the hydraulic shearing plate can adjust the machine.

The model of an ordinary bending machine is a digital bending machine. The digital bending machine is a hydraulic shearing machine, and the digital bending machine is a cutting tool. The calculation accuracy is high and low. It belongs to a gantry mobile bending machine. The servo motor is a linear motor, the rotor of the motor is a circular arc motor, and the movement of the cutting tool is a theoretical rotational movement that calculates the angle. The servo motor is a caster movement.

Maintenance concept of CNC bending machines. The so-called fault refers to the failure of the equipment that has been diagnosed, and the various phenomena and inadequate handling before the failure directly make the CNC bending machine operate better. When the effect of mechanical maintenance is truly achieved, maintenance experience becomes even more important.

Symptom: The adjusted foot switch is turned on or off. Check that the switch is activated and the pulley is not disengaged.

Fault symptom: The pulley brake is equipped and adjusted. Selection of automatic braking system, ram and reducer.

Fault phenomenon: The matching adjustment wheel impact clutch can be disengaged, the clutch automatically disengages, and the release clutch plate is only temporarily adjusted.

"To install a mold on a press, it is necessary to use a regular press, and some parts also require manual tool setting. This is the simplest and most direct method.".