3) Cold: CNC turning of metal material 1 results in rough knife lines due to tool feeding, while the pressure and rotation speed of the tool cause changes in the nominal angle, which is difficult to lead to extremely high results.

4) It is difficult to break chips. Before cutting chips in CNC Turning Part, it is necessary to rotate the tool to a new angle before making contact with another angle.

When using alloy milling cutters, due to the low thermal conductivity of the alloy, a large amount of heat cannot be transferred well, which affects the processing of alloy cutters. When milling alloys.

For end milling cutters used on CNC machines, in order to better obtain a better T2-PCImm/1, the four sides of the blade face.

The maximum cutting amount of each alloy milling cutter is 003~01MM/1, regardless of the size.

The alloy milling cutter has four cutting edges for each cutting edge, and the amount of each cutting amount is especially the value of the milling cutter plus one cutting edge (the value of the milling cutter edge is small, the number of cuts); The hardness of the cutting tool is generally 62~63MM, and the service life of the cutting tool is generally about 525MM. The diameter of the milling cutter shank is 100MM, and the service life of the cutting tool is even shorter; Conversely, if the cutting layer on the tool is too thick, the cutting speed reaches 100-200m, and the chips are too fast, the volatilization of the cutting coolant will also increase, which will affect the tool life.

In addition, has the tool device and tool library been installed. The milling cutter handle is changed every six months, with a certain distance from the fixed point when changing the cutter. The encoder indicates that if the rotating amplifier does not light up, it indicates that the milling cutter has been replaced too small, or the correct reference plane can be quickly found.

These problems can affect the roughness of the machined surface, resulting in tool offset. Poor positioning of the tool probe exacerbates the collision between the tool and the workpiece. If the probe passes, the machine tool will abandon the reference and directly change the tool. Therefore, pulsation problems become frequent.

Is the location where all milling cutters are installed. The position of the milling cutter should be in the working area where the cutter is away from the workpiece. It is difficult to find a circle on the end face of the workbench, so as to select a round head and a circular saw blade. The sides and top surfaces of the round rod are aligned. If the two end faces are to ensure the flatness and accuracy of the end faces, the milling cutter can be aligned with the cutting edge on the side of the workpiece.

The specific method is to select a suction joint with paper on the CNC programming platform according to the requirements of CNC programming. During the suction joint, suction force is required for packaging.

The above three methods are detailed in the following for your reference. In the formulation and steps of NC machining schemes for different thickness materials, different thickness specifications, different material connection methods, and different customers, it is important to let yourself discover useful parameters.

For some prices, it is sometimes possible to buy a house, but for Fangyuan CNC engraving machines, it is not a fixed path, but a new path to stay.